xStack® DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch Web UI Reference Guide
294
Figure 7-31 CPU Access Rule List (IPv4 ACL)
Click the
Add Rule
button to create a new CPU ACL rule in this profile.
Click the
<<Back
button to return to the previous page.
Click the
Show Details
button to view more information about the specific rule created.
Click the
Delete Rules
button to remove the specific entry.
Enter a page number and click the
Go
button to navigate to a specific page when multiple pages exist.
After clicking the
Add Rule
button, the following window will appear:
Figure 7-32 Add CPU Access Rule (IPv4 ACL)
The fields that can be configured are described below:
Parameter
Description
Access ID (1-100)
Type in a unique identifier number for this access. This value can be set from
1
to
100
. A lower value denotes a higher priority.
Action
Select
Permit
to specify that the packets that match the access profile are forwarded
by the Switch, according to any additional rule added (see below).
Select
Deny
to specify that the packets that match the access profile are not
forwarded by the Switch and will be filtered.
VLAN Name
Allows the entry of a name for a previously configured VLAN.
Time Range Name
Tick the check box and enter the name of the Time Range settings that has been
previously configured in the
Time Range
Settings
window. This will set specific
times when this access rule will be implemented on the Switch.
Ports
Ticking the All Ports check box will denote all ports on the Switch.
Click the
Apply
button to accept the changes made.
Summary of Contents for xStack DGS-3120 Series
Page 1: ......
