xStack® DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch Web UI Reference Guide
41
Figure 3-5 Gratuitous ARP Settings window
The fields that can be configured are described below:
Parameter
Description
Trap
Use the drop-down menu to enable or disable the trap option. By default the trap is
disabled.
Log
Use the drop-down menu to enable or disable the logging option. By default the
event log is enabled.
Interface Name
Enter the interface name of the Layer 3 interface. Select
All
to enable or disable
gratuitous ARP trap or log on all interfaces.
Interval Time (0-65535)
Enter the periodically send gratuitous ARP interval time in seconds. 0 means that
gratuitous ARP request will not be sent periodically. By default the interval time is 0.
Click the
Apply
button to accept the changes made for each individual section.
IPv6 Neighbor Settings
The user can configure the Switch’s IPv6 neighbor settings. The Switch’s current IPv6 neighbor settings will be
displayed in the table at the bottom of this window.
To view the following window, click
Management > IPv6 Neighbor Settings
, as shown below:
Summary of Contents for xStack DGS-3120 Series
Page 1: ......