xStack® DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch Web UI Reference Guide
326
Figure 8-13 Guest VLAN Settings window
The fields that can be configured are described below:
Parameter
Description
VLAN Name
Enter the pre-configured VLAN name to create as an 802.1X guest VLAN.
Unit
Specify a unit to be configured.
(EI and SI Mode Only)
Port
Set the ports to be enabled for the 802.1X guest VLAN. Click the
All
button to select all the
ports.
Click the
Apply
button to accept the changes made.
Click the
Delete
button to remove the specific entry based on the information entered.
Authenticator State
This window is used to display the authenticator state.
To view this window, click
Security > 802.1X > Authenticator State
as shown below:
Figure 8-14 Authenticator State window
The fields that can be configured are described below:
Parameter
Description
Unit
Select the unit to be displayed.
(EI and SI Mode Only)
Port
Select a port to be displayed.
Click the
Find
button to locate a specific entry based on the information entered.
Click the
Refresh
button to refresh the display table so that new entries will appear.
NOTE:
The user must first globally enable
Authentication Mode
in the
802.1X Global Settings
window before initializing ports. Information in this window cannot be viewed before enabling
the authentication mode for either
Port-based
or
MAC-based
.
Authenticator Statistics
This window is used to display the authenticator statistics information.
To view this window, click
Security > 802.1X > Authenticator Statistics
as shown below:
Summary of Contents for xStack DGS-3120 Series
Page 1: ......