D-Link xStack DGS-3120 Series, Reference Manual

Page: 500 / 509

xStack® DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch Web UI Reference Guide
490
3. swTemperatureCurrent
swLowTemperatureRecover Low Temperature notification.
Binding
1. swTemperatureUnitIndex
2. swTemperSensorID
3. swTemperatureCurrent
1.3.6.1.4.1.171.12.11.2.2.4.0.4
agentFirmwareUpgrade This trap is sent when the process of upgrading the
firmware via SNMP has finished.
Binding
1. swMultiImageVersion 1.3.6.1.4.1.171.12.1.7.2.0.7
agentCfgOperCompleteTrap The trap is sent when the configuration is
completely saved, uploaded or downloaded.
Binding
1. unitID
2. agentCfgOperate
3. agentLoginUserName 1.3.6.1.4.1.171.12.1.7.2.0.9
swPowerFailure Power Failure notification.
Binding
1. swPowerUnitIndex
2. swPowerID
3. swPowerStatus 1.3.6.1.4.1.171.12.11.2.2.2.0.2
swPowerRecover Power Recover notification.
Binding
1. swPowerUnitIndex
2. swPowerID
3. swPowerStatus 1.3.6.1.4.1.171.12.11.2.2.2.0.3
swUnitInsert Unit Hot Insert notification.
Binding
1. swUnitMgmtId
2. swUnitMgmtMacAddr 1.3.6.1.4.1.171.12.11.2.2.1.0.1
swUnitRemove Unit Hot Remove notification.
Binding
1. swUnitMgmtId
2. swUnitMgmtMacAddr 1.3.6.1.4.1.171.12.11.2.2.1.0.2
swUnitFailure Unit Failure notification.
Binding
1. swUnitMgmtId 1.3.6.1.4.1.171.12.11.2.2.1.0.3
swUnitTPChange The stacking topology change notification.
Binding
1. swStackTopologyType
2. swUnitMgmtId
3. swUnitMgmtMacAddr 1.3.6.1.4.1.171.12.11.2.2.1.0.4
swUnitRoleChange The stacking unit role change notification.
Binding
1. swStackRoleChangeType
2. swUnitMgmtId 1.3.6.1.4.1.171.12.11.2.2.1.0.5
lldpRemTablesChange A lldpRemTablesChange notification is sent when
the value of lldpStatsRemTableLastChangeTime
changes. It can be utilized by an NMS to trigger
LLDP remote systems table maintenance polls.
Binding
1. lldpStatsRemTablesInserts
2. lldpStatsRemTablesDeletes
3. lldpStatsRemTablesDrops
4. lldpStatsRemTablesAgeouts 1.0.8802.1.1.2.0.0.1
lldpXMedTopologyChangeDetected A notification generated by the local device sensing
a change in the topology that indicates that a new
remote device attached to a local port, or a remote
device disconnected or moved from one port to
another.
Binding
1. lldpRemChassisIdSubtype
2. lldpRemChassisId
3. lldpXMedRemDeviceClass 1.0.8802.1.1.2.1.5.4795.0.1
swDdmAlarmTrap The trap is sent when any parameter value
exceeds the alarm threshold value or recover to
normal status depending on the configuration of
the trap action.
Binding
1. swDdmPort
2. swDdmThresholdType 1.3.6.1.4.1.171.12.72.4.0.1