D-Link xStack DGS-3120 Series, Reference Manual

Page: 37 / 509

xStack® DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch Web UI Reference Guide
27
Figure 2-24 System Log Settings window
The fields that can be configured are described below:
Parameter Description
System Log Use the radio buttons to enable or disable the system log settings.
Save Mode Use the drop-down menu to choose the method for saving the switch log to the flash memory.
The user has three options:
On Demand – Users who choose this method will only save log files when they manually tell
the Switch to do so, either using the Save Log link in the Save folder.
Time Interval – Users who choose this method can configure a time interval by which the
Switch will save the log files, in the box adjacent to this configuration field. The user may set
a time between 1 and 65535 minutes.
Log Trigger – Users who choose this method will have log files saved to the Switch every
time a log event occurs on the Switch.
Click the Apply button to accept the changes made for each individual section.
System Log Server Settings
The Switch can send System log messages to up to four designated servers using the System Log Server.
To view the following window, click System Configuration > System Log Configuration > System Log Server
Settings , as shown below:
Figure 2-25 System Log Server Settings
The fields that can be configured are described below:
Parameter Description
Server ID Syslog server settings index (1 to 4).
Severity Use the drop-down menu to select the higher level of messages that will be sent. All
messages which level is higher than selecting level will be sent. The options are
Emergency , Alert , Critical , Error , Warning , Notice , Informational and Debug .
Server IPv4 Address The IPv4 address of the Syslog server.
Server IPv6 Address The IPv6 address of the Syslog server.
Facility Use the drop-down menu to select Local 0 , Local 1 , Local 2 , Local 3 , Local 4 , Local 5 ,
Local 6 , or Local 7 .
UDP Port Type the UDP port number used for sending Syslog messages. The default is 514.