xStack® DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch Web UI Reference Guide
410
Figure 9-15 DHCP Server Manual Binding Window
The fields that can be configured are described below:
Parameter
Description
Pool Name
Enter the DHCP Server Pool name.
IP Address
IP address which will be assigned to specified client.
Hardware Address
Enter the hardware address.
Type
Either
Ethernet
or
IEEE802
can be specified.
Click the
Add
button to add a new entry based on the information entered.
Click the
Delete All
button to remove all the entries listed.
Click the
Delete
button to remove the specific entry.
DHCP Server Dynamic Binding
This window is used to delete the DHCP server dynamic binding table.
To view this window, click
Network Application > DHCP > DHCP Server > DHCP Server Dynamic Binding
as
shown below:
Figure 9-16 DHCP Server Dynamic Binding Window
The fields that can be configured are described below:
Parameter
Description
Pool Name
Enter the DHCP Server Pool name.
Click the
Clear
button to clear all the information entered in the fields.
Click the
Clear All
button to remove all the entries listed in the table.
DHCP Conflict IP
The DHCP server will use PING packet to determine whether an IP address is conflict with other host before
binding this IP. The IP address which has been identified conflict will be moved to the conflict IP database. The
system will not attempt to bind the IP address in the conflict IP database unless the user clears it from the conflict
IP database.
To view this window, click
Network Application > DHCP > DHCP Server > DHCP Conflict IP
as shown below:
Summary of Contents for xStack DGS-3120 Series
Page 1: ......
