manualshive.com logo in svg

D-Link xStack DGS-3120 Series, Reference Manual

Share
Download
D-Link xStack DGS-3120 Series Reference Manual Download Page 136

xStack® DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch Web UI Reference Guide 

126 

 

Click the 

Apply

 button to accept the changes made for each individual section. 

Click the 

Select All

 button to select all the ports for configuration. 

Click the 

Clear All

 button to unselect all the ports for configuration. 

 

MLD Proxy Downstream Settings 

Users can configure the MLD proxy downstream interface in this page. The MLD proxy downstream interface must 
be a MLD snooping enabled VLAN. 

To view the following window, click 

L2 Features > L2 Multicast Control > MLD Proxy > MLD Proxy 

Downstream Settings

, as shown below: 

 

 

Figure 4-71 MLD Proxy Downstream Settings window 

 

The fields that can be configured are described below: 

Parameter 

Description 

VLAN Name 

The VLAN name for the interface. 

VID List 

The VID List for the interface. 

Downstream Action 

Here the user can select the appropriate action. Selecting 

Add 

will add a downstream 

interface. Selecting 

Delete

 will remove a downstream interface. 

Click the 

Apply

 button to accept the changes made. 

 

MLD Proxy Group 

This window is used to display the MLD Proxy Group. 

To view the following window, click 

L2 Features > L2 Multicast Control > MLD Proxy > MLD Proxy Group

, as 

shown below: 

 

 

Figure 4-72 MLD Proxy Group window 

 

Click the 

Member Ports

 link to view the MLD proxy member port information. 

 

After clicking the 

Member Ports

 option, the following window will appear. 

 

Figure 4-73 MLD Proxy Group window 

 

Summary of Contents for xStack DGS-3120 Series






























































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands