D-Link xStack DGS-3120 Series, Reference Manual

Page: 76 / 509

xStack® DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch Web UI Reference Guide
66
Figure 3-43 SNMP User Table Settings window
The fields that can be configured are described below:
Parameter Description
User Name An alphanumeric string of up to 32 characters. This is used to identify the SNMP
users.
Group Name This name is used to specify the SNMP group created can request SNMP messages.
SNMP Version V3 – Indicates that SNMP version 3 is in use.
SNMP V3 Encryption Use the drop-down menu to enable encryption for SNMP V3. This is only operable in
SNMP V3 mode. The choices are
None , Password , or Key .
Auth-Protocol MD5 – Specify that the HMAC-MD5-96 authentication level will be used. This field is
only operable when V3 is selected in the SNMP Version field and the Encryption field
has been checked. This field will require the user to enter a password.
SHA – Specify that the HMAC-SHA authentication protocol will be used. This field is
only operable when V3 is selected in the SNMP Version field and the Encryption field
has been checked. This field will require the user to enter a password.
Priv-Protocol None – Specify that no authorization protocol is in use.
DES – Specify that DES 56-bit encryption is in use, based on the CBC-DES (DES-56)
standard. This field is only operable when V3 is selected in the SNMP Version field
and the Encryption field has been checked. This field will require the user to enter a
password.
Click the Apply button to accept the changes made.
Click the Delete button to remove the specific entry.
SNMP Host Table Settings
Users can set up SNMP trap recipients for IPv4.
To view the following window, click Management > SNMP Settings > SNMP Host Table Settings , as shown
below:
Figure 3-44 SNMP Host Table Settings window