xStack® DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch Web UI Reference Guide
122
Enter a page number and click the
Go
button to navigate to a specific page when multiple pages exist.
NOTE:
The abbreviations used in this window are
Static Router Port (S)
,
Dynamic Router Port (D)
and
Forbidden Router Port (F)
.
IGMP Snooping Group
Users can view the Switch’s IGMP Snooping Group Table. IGMP Snooping allows the Switch to read the Multicast
Group IP address and the corresponding MAC address from IGMP packets that pass through the Switch.
To view the following window, click
L2 Features > L2 Multicast Control > IGMP Snooping > IGMP Snooping
Group
, as shown below:
Figure 4-64 IGMP Snooping Group window (RI Mode Only)
Figure 4-65 IGMP Snooping Group window (EI and SI Mode Only)
The user may search the
IGMP Snooping Group Table
by either
VLAN Name
or
VID List
by entering it in the top
left hand corner and clicking
Find
.
The fields that can be configured are described below:
Parameter
Description
VLAN Name
The VLAN Name of the multicast group.
VID List
The VLAN ID list of the multicast group.
Port List
Specify the port number(s) used to find a multicast group.
Group IPv4 Address
Enter the IPv4 address.
Data Driven
If selected, only data driven groups will be displayed.
(EI and SI Mode Only)
Click the
Clear Data Driven
button to delete the specific IGMP snooping group which is learned by the Data Driven
feature of the specified VLAN.
Click the
View All
button to display all the existing entries.
Click the
Clear All Data Driven
button to delete all IGMP snooping groups which is learned by the Data Driven
feature of specified VLANs.
Summary of Contents for xStack DGS-3120 Series
Page 1: ......
