Chevrolet 10 Series 1968, Service Manual

Page: 31 / 713

LUBRICATION 0-28
Figure 12 shows the differences between the tilt cab
and the conventional truck lubrication chart.
1. Steering Gear - The fille r plug is located behind the
steering gear shaft.
2. Tilt Cab Body Hinges - Each hinge should be lubri­
cated through a fitting with chassis lube every 6,000
miles.
3. Tilt Mechanism Check Link - Every 6,000 miles, a
small amount of lubriplate or equivalent should be
applied to the check link and roller.
4. Tilt Cab Operating Controls - The operating controls
and levers at the rear of the cab should be lubricated
at each pivot or bearing point with a small amount of
engine oil every 6,000 miles. An additional lube
fitting is provided on the hold-down catch pivot.
This should be lubricated every 6,000 miles with
chassis lubricant.
F ig . 12—M aintenance and Lubrication Diagram - T ilt C ab Models
CHEVROLET TRUCK SERVICE MANUAL