Chevrolet 10 Series 1968, Service Manual

Page: 508 / 713

CLUTCHES AND TRANSMISSIONS 7-45
when Cold, complete loss of drive may result
which can cause transmission failure.
NOTE: If transmission fluid level is correctly
established at70°F.it will appear at the “ F U L L "
mark on the dip stick when the transmission
reaches normal operating temperature (180°F.).
The fluid level is set 1/4" below the “ ADD”
mark on the dip stick to allow for expansion of
the fluid which occurs as transmission tempera­
tures rise to normal operating temperature of
180 °F.
FLUID LEVEL INDICATOR
The fluid level indicator is located in the fille r pipe at
the right rear corner of the engine. To bring the fluid
level from the add mark to the full mark add
1
pint.
Fluid level should be to the full mark with transmission
at normal operating temperature. With cold fluid the
level should be 1/4 inch below the add mark.
SHIFT CONTROL LINKAGE ADJUSTMENT
Adjust linkage as described below:
VIEW B
VIEW A
F ig . 3 T —Lower Control Linkage (PS 20-30 Models)
CHEVROLET TRUCK SERVICE MANUAL