Chevrolet 10 Series 1968, Service Manual

Page: 670 / 713

RADIATOR AND GRILLE 13-7
GRILLE SERVICE PROCEDURES
INDEX
Page Page
Service Operations - 10 thru 30 S e r i e s ............................. 13-7 G rille Replacement - CA-SA40-50-60,
G rille Replacement - CA-KA10-20, CA30 MA50-60 M o d e l s ............................................................. 13-7
M o d e ls ................................................................................. 13-7 G rille Replacement - T A M o d e ls ................................... 13-8
Service Operations - 40 thru 60 S e r i e s ............................. 13-7
SERVICE OPERATIONS— 10 THRU 30 SERIES
CA -KA 10-20, CA 30 MODELS,
GRILLE REPLACEMENT (Fig. 16)
Removal
1. Disconnect battery ground cable.
2. Remove front bumper (Section 14).
3. Remove headlamp bezels. Disconnect and remove
headlamps.
4. Remove screws securing baffle to bottom of grille
and radiator support and remove baffle.
5. Remove screws attaching hood catch to radiator
support. Remove screw securing bottom of center
support to radiator support.
6. Unplug parking lamps from receptacles at radiator
support.
7. Remove screws, four from each side, securing grille
assembly to fenders and frame and remove grille
from vehicle.
8. Replace extensions, mouldings, center support, and
hood catch plate as necessary.
Installation
Assemble and install grille and related components
following the removal procedure in reverse order. Refer
to torque specifications at rear of manual for correct
torque values.
F ig. 16—G r ille M ounting— C A -K A 1 0 -2 0 , C A 3 0 Models
SERVICE OPERATIONS—40 THRU 60 SERIES
CA-SA40-50-60, M A50-60 MODELS
GRILLE REPLACEMENT (Fig. 17)
Removal
1. Remove battery from vehicle.
2. Remove front bumper (Section 14).
3. Disconnect headlamp, parking lamp, horn, and volt­
age regulator electrical connections.
4. Remove screws from each headlamp bezel and re­
move bezels and headlamps.
CHEVROLET TRUCK SERVICE MANUAL