CET PMC-592, User Manual, Page: 81 / 177

80
CET Electric Technology
Parameter Phase A Phase B Phase C Total Average Neutral
Loading Factor ● ● ● ○ ○ ○
kW ● ● ● ● ○ ○
kvar ● ● ● ● ○ ○
kVA ● ● ● ● ○ ○
PF ● ● ● ● ○ ○
Frequency ● ○ ○ ○ ○ ○
TC1/TC2 ●
Branch
Current ● ● ● ○ ○ ○
Loading Factor ● ● ● ○ ○ ○
kW ● ● ● ● ○ ○
kvar ● ● ● ● ○ ○
kVA ● ● ● ● ○ ○
PF ● ● ● ● ○ ○
Table 4-3 Basic Measurement
4.2.2 Energy Measurements
The PMC-592's Energy measurements include active energy (kWh), reactive energy (kvarh) and
apparent energy (kVAh) with a resolution of 0.1 and a maximum value of 100,000,000.0. When the
maximum value is reached, it will automatically roll over to zero.
The energy can be reset manually or preset to user-defined values through the HMI or via
communications. The PMC-592 provides the following energy measurements:
kWh Import kWh Export kvarh Import kvarh Export kVAh Total
Mains-I/II ● ● ● ● ●
Branch ● ○ ● ○ ●
Table 4-4 Energy Measurements
The PMC-592 with Firmware V1.00.10 or later provides the following Tariff (T1/T2) energy
measurements for Mains-I/II and VMs if the Tariff Switch is enabled.
kWh Import kWh Export kvarh Import kvarh Export kVAh Total
Mains-I/II ● ● ● ● ●
VMs ● ○ ● ○ ●
Table 4-5 T1/T2 Energy Measurements
Tariff Energy for T1/T2 can be enabled by selecting a particular DI to be a Tariff Switch .
Tariff Switch Mode DIx Status Tariff
Disabled None None
DIx
Inactive T1
Active T2
Table 4-6 Tariff Switch Mode
The following figures illustrate where to enable a particular DI as a Tariff Switch via the Web Interface
or HMI.
Figure 4-4 Enabling a DI as a Tariff Switch via the Web and HMI