25
CET Electric Technology
Figure 2-28 Connecting the Branch SCCT’s output wires to the Adapter Board
Figure 2-29 Installing the Branch Cable
2.3.3 Mounting the Optional 7” Touch-Screen HMI
The HMI should be mounted on the cabinet door with a minimum clearance of 105mm from the door
to the inside components.
1.
Put the HMI through the cutout.
2.
Install the installation clips as per the diagram below.
3.
Affix the supplied screws through the hole of the installation clips.
4.
Tighten the screws against the back of the panel until the HMI is mounted securely in place.