CET PMC-592, User Manual, Page: 149 / 177

148
CET Electric Technology
5.8.10.2 Clear/Reset Control
Register Property Description Format Note
7200 WO Clear All Latched Alarms UINT16
Writing “0xFF00” to the register clears all the
Latched Alarms
7201 WO Clear All Alarm Counters UINT16
Writing “0xFF00” to the register clears all the
Alarm Counters
7202 WO Clear SOE UINT16
Writing “0xFF00” to the register clears the
SOE Log
7203 WO Clear Energy
1
UINT16
1) Writing “0xFFFF” to the register clears all
the Energy registers
2) Writing “0x00FF” to the register clears all
Mains Energy registers
3) Writing “0x01FF” to the register clears all
SM Energy registers
4) Writing “0x02FF” to the register clears all
VM Energy registers
7204 WO Clear Max Demand Logs 2 UINT16
1) Writing “0xFFFF” to the register clears all
the Max Demand Logs and Max Demand Logs
of This Month
2) Writing “0x00FF” to the register
clears all Mains Max Demand Logs and Max
Demand Logs of This Month
3) Writing “0x01FF” to the register clears all
SMx Max Demand Logs and Max Demand
Logs of This Month
7205 WO Clear Max/Min Recorder Logs UINT16
Writing “0xFF00” to the register clears all the
Max/Min Logs
7206 WO Clear WFR Log UINT16
Writing “0xFF00” to the register clears all the
WFR
7207 WO Clear IER Logs UINT16
Writing “0xFF00” to the register clears all the
energy logs
7208 WO Trigger WFR UINT16 Writing “0xFF00” to the register trigger WFR
7209 WO Voltage Phase for Sequential Mode UINT16
Writing “0xFF00” to the register configures
the Voltage Phase for Sequential Mode
7210 WO Voltage Phase for Cross-over Mode UINT16
Writing “0xFF00” to the register configures
the Voltage Phase for Cross-over Mode
7211 WO Voltage Phase 1P3W Mode UINT16
Writing “0xFF00” to the register configures
the Voltage Phase for 1P3W Mode
7212 WO Test Sending Email 3 UINT16
Writing “0xFF00” to the Register sends a test
Email to the specified Destination Email
address.
7213 WO Clear DR
#
UINT16
Writing 0 to 9 to the register clears DR#1 to
DR#10, while writing “0xFF00” clears all of
the DRs
7220 WO Clear All 4 UINT16
Writing “0xFF00” to the register clears all of
the above
7221 WO Reset Device to Default* UINT16
Writing “0xFF00” to the register reset all
parameters to default.
#
Available in Firmware V1.00.04 or later
* Available in Firmware V1.00.05 or later
Table 5-100 Clear/Reset Control Setup
Notes:
1) The following table provides a detailed description of the different values that can be written to the Clear Energy register to
clear the different Energy registers such as Mains-I, Mains-II, SMx and VMx.
Key
Clear Energy Register Values
Description
High Order Low Order
0
0x00
(Mains)
0x00 Clear Main-I Energy (0x0000)
0x01 Clear Main-II Energy (0x0001)
1
0x01
(SMx)
0x00 Clear 1-Ø SM1 Energy (0x0100)
0x01 Clear 1-Ø SM2 Energy (0x0101)
0x02 Clear 1-Ø SM3 Energy (0x0102)
…. ….
0x53 Clear 1-Ø SM84 Energy (0x0153)
0x54 Clear 2-Ø SM1 Energy (0x0154)
0x55 Clear 2-Ø SM2 Energy (0x0155)
0x56 Clear 2-Ø SM3 Energy (0x0156)