47
CET Electric Technology
Figure 3-2 Setting PC’s IP Address
3.2.2 Configure PMC-592's IP Address using the Touch-Screen HMI
To configure the PMC-592's IP Address, touch the
Setup
icon on the Main page, and
then touch
Communication
icon to enter
Communication Setup
. Enter the IP Address, Subnet Mask and Gateway
at the highlighted section below.
Figure 3-3 Configure PMC-592’s IP Address
3.2.3 Accessing PMC-592’s Web Interface via Mobile Devices
The PMC-592 with Firmware V1.00.10 or later supports the browsing of its webpage via mobile devices,
such as iPhone, iPad or Android Devices. Before browsing the PMC-592’s web interface via mobile
devices, a basic LAN (Local Area Network) should be set up where the PMC-592 is connected to a
wireless access point or router with the correct IP Address and Subnet Mask. A simple network structure
providing wireless access to the PMC-592 is illustrated below.
Figure 3-4 LAN Structure
The following screen captures provide some examples of the PMC-592 web pages from a mobile device.