CET PMC-592, User Manual, Page: 156 / 177

155
CET Electric Technology
2 0 0 Disk Fault
3 0 0 A/D Fault
4 0 0 CT Strip Installation Fault
5 0 0 Internal Power Fault
6 - - Reserved
7 0 0 DSP Fault
8 0 0 System Parameters Fault
9 0 0 SM Name Parameters Fault
10 0 0 Communication Parameters Fault
11 0 0 Breaker Parameters Fault
12 0 0 Alarm Parameters Fault
13 0 0 Branch Parameters Fault
14 0 0 Total VM Parameters Fault
15 0 0 Calibration Parameters Fault
16 0 0 Internal Parameters Fault
17 0 1-4 External DI Module Communication Fault
18 0 0 DR Parameters Fault
Note:
1) The following table provides a detailed description of the Channel Number.
Channel Number Description Channel Number Description
0 Mains-I, Power 20 Mains-II, Ubc
1 Mains-II, Power 21 Mains-II, Uca
2 Mains-I, Ia 22 System Frequency
3 Mains-I, Ib 23 RTD1
4 Mains-I, Ic 24 RTD2
5 Mains-I, I4 25 DI1
6 Mains-II, Ia 26 DI2
7 Mains-II, Ib 27 Mains-I, Voltage Unbalance
8 Mains-II, Ic 28 Mains- II, Voltage Unbalance
9 Mains-II, I4 29 Mains-I, Current Unbalance
10 Mains-I, Uan 30 Mains- II, Current Unbalance
11 Mains-I, Ubn 31 DI3 (4xDIs option only)
12 Mains-I, Ucn 32 DI4 (4xDIs option only)
13 Mains-I, Uab 33-34 Reserved
14 Mains-I, Ubc 35 SM1
15 Mains-I, Uca 36 SM2
16 Mains-II, Uan …. ….
17 Mains-II, Ubn 34+n SMn
18 Mains-II, Ucn 117 SM83
19 Mains-II, Uab 118 SM84
2) The following table provides a detailed description of the Parameter Type for loading the Factory Default Configuration.
Parameter Type Description
0 System parameter
1 SM name parameter
2 Communication parameter
3 Breaker capacity parameter
4 Alarm parameter
5 Branch Voltage Phase parameter
6 Total VM Parameters
7 Calibration Parameters
8 Internal parameter
9 All parameter
10 DR Parameter
3) The Return Value of the Dip/Swell and Interruption alarm are:

Dip: Min. Voltage value

Swell: Max. Voltage value

Interruption: Max. Voltage value