CET PMC-592, User Manual, Page: 150 / 177

149
CET Electric Technology
…. ….
0x7D Clear 2-Ø SM42 Energy (0x017D)
0x7E Clear 3-Ø SM1 Energy (0x017E)
0x7F Clear 3-Ø SM2 Energy (0x017F)
0x80 Clear 3-Ø SM3 Energy (0x0180)
…. ….
0x99 Clear 3-Ø SM28 Energy (0x0199)
2
0x02
(Total VMx)
0x00 Clear VM1 Energy (0x0200)
0x01 Clear VM2 Energy (0x0201)
0x02 Clear VM3 Energy (0x0202)
…. ….
0x09 Clear VM10 Energy (0x0209)
3* 0x03
0x00 Clear Mains-I T1 Energy (0x0300)
0x01 Clear Mains-II T1 Energy (0x0301)
4* 0x04
0x00 Clear Mains-I T2 Energy (0x0400)
0x01 Clear Mains-II T2 Energy (0x0401)
5* 0x05
0x00 Clear VM1 T1 Energy (0x0500)
0x01 Clear VM2 T1 Energy (0x0501)
0x02 Clear VM3 T1 Energy (0x0502)
…. ….
0x09 Clear VM10 T1 Energy (0x050A)
6* 0x06
0x00 Clear VM1 T2 Energy (0x0600)
0x01 Clear VM2 T2 Energy (0x0601)
0x02 Clear VM3 T2 Energy (0x0602)
…. ….
0x09 Clear VM10 T2 Energy (0x060A)
* Available in Firmware Version V1.00.10 or later
Table 5-101 Clear Energy Register Values
2) The following table provides a detailed description of the different values that can be written to the Clear Max Demand
Logs register to clear the different Max Demand Logs such as Mains-I, Mains-II, SMx and VMx.
Key
Clear Max Demand Logs Register Values
Description
High Order Low Order
1
0x00
(Mains)
0x00 Clear Mains-I Max Demand Logs (0x0000)
0x01 Clear Mains-II Max Demand Logs (0x0001)
2
0x01
(SMx)
0x00 Clear 1-Ø SM1 Max Demand Logs (0x0100)
0x01 Clear 1-Ø SM2 Max Demand Logs (0x0101)
0x02 Clear 1-Ø SM3 Max Demand Logs (0x0102)
…. ….
0x53 Clear 1-Ø SM84 Max Demand Logs (0x0153)
0x54 Clear 2-Ø SM1 Max Demand Logs (0x0154)
0x55 Clear 2-Ø SM2 Max Demand Logs (0x0155)
0x56 Clear 2-Ø SM3 Max Demand Logs (0x0156)
…. ….
0x7D Clear 2-Ø SM42 Max Demand Logs (0x017D)
0x7E Clear 3-Ø SM1 Max Demand Logs (0x017E)
0x7F Clear 3-Ø SM2 Max Demand Logs (0x017F)
0x80 Clear 3-Ø SM3 Max Demand Logs (0x0180)
…. ….
0x99 Clear 3-Ø SM28 Max Demand Logs (0x0199)
3
0x02*
(RTDx)
0x00 Clear RTD1 Temp. Max Demand (0x0200)
0x01 Clear RTD2 Temp. Max Demand (0x0201)
* Available in Firmware Version V1.00.04 or later
Table 5-102 Clear Max Demand Logs Register Values
3) The Test Sending Email register is used to test whether the SMTP setup is correct. PMC-592 will send a test email to the
specified receiver email address when the value 0xFF00 is written to this register.
4) Writing “0xff00” to the register clears all logs, including Latched Alarm, Alarm counter, IER Log, SOE Log, Max/Min Log of
This Month, Max/Min Log of Last Month, This Max Demand, Last Max Demand, Waveform Recorder and Energy.