CET PMC-592, User Manual, Page: 12 / 177

11
CET Electric Technology
o
Current THD for each 1-Ø SM
Non-Volatile Memory and Logs

1GB On-Board Non-Volatile Memory
Interval Energy Recorder (IER) Log

Complete energy profiling of Mains-I/II, 1-Ø , 2-Ø and 3-Ø SMs, VMs as well as the Mains-I/II and
VMs for Tariffs T1 and T2

Programmable Interval at 5, 10, 15, 30 or 60 minute intervals

Fixed Log Depth at 10,000 entries, capable of recording for 3 months @ 15-min interval or 1 year
@ 60-min interval
Max/Min Log

Mains U & I, Frequency, kW, kvar, kVA, Loading Factor, PF, Unbalance, THD, TOHD, TEHD

1-Ø SMs: I, kW, kvar, kVA, PF, Loading Factor and I THD

2-Ø and 3-Ø SMs: I avg, kW, kvar, kVA, PF and Loading Factor

RTD1 and RTD2

Max./Min. Timestamp for Historical, This Month and Last Month
SOE Log

1000 FIFO events time-stamped to ±1ms resolution

Setup changes, Power-On/Off, Alarms, Diagnostics and I/O operations
Data Recorder (DR) Log

10 Data Recorders of 64 parameters each for a total of 640 Real-time parameters

Programmable Log Depth (65535 max.) and Recording Interval (60-345600s)
Waveform Recorder (WFR) Log

Support up to 16 WFR Log entries

Record V1-V3 and I1-I3 for both Mains-I and Mains-II

Programmable resolutions (samples/cycle x # of cycles) at 64x150, 64x75, 32x300, 32x150, 16x600
and 16x300

Triggered by Dip/Swell and Interruption Setpoints
Alarming

Support powerful alarming functions for Mains, Branches, RTDs and DIs

Support High-High, High, Low, Low-Low and OFF Alarms

Configurable Threshold and Time Delay for each branch

Support Current, Voltage, Power, PF, Frequency, Unbalance, Harmonic Distortion, Temperature and
DI status change Alarms and their respective Alarm Counters

Support Dip/Swell and Interruption Setpoint Alarms, Phase Reversal Alarm and Phase Loss Alarm
since Firmware V1.00.05

All alarms are recorded in the SOE Log
Inputs and Outputs

Digital Inputs
o
2 standard or 4 optional* DI channels, volts free dry contact, 24VDC internally wetted
o
Support up to 4 External DI Modules from CET (e.g. PMC-521D) via Port 2 (RS-485)
o
1000Hz sampling for status monitoring with programmable debounce