manualshive.com logo in svg

Canon LASER CLASS 2050P, User Manual

Share
Download
Canon LASER CLASS 2050P User Manual Download Page 9

Preface

ix

HT1-2205-000-V.1.0 LSL User’s Guide

USERS IN CANADA

PRE-INSTALLATION REQUIREMENTS FOR CANON 
FACSIMILE EQUIPMENT

A. Location

Supply a suitable table, cabinet, or desk. See the Appendix for the 
machine’s dimensions and weight.

B. Order Information

1.

Provide only a single-line to touch-tone or rotary telephone set 
terminated with a standard 4-pin modular phone plug. (Touch-
tone is recommended if available in your area.)

2.

Order an CA11A modular jack (USOC code), which should be 
installed by the telephone company. If the CA11A jack is not 
present, installation cannot occur.

3.

Order a normal business line from your telephone company’s 
business representative. The line should be a regular voice grade 
line or equivalent. Use one line per machine.

DDD (DIRECT DISTANCE DIAL) LINE

-or-

IDDD (INTERNATIONAL DIRECT DISTANCE DIAL) LINE IF 
YOU COMMUNICATE OVERSEAS

Canon recommends an individual line following industry standards [e.g., 
the 2500 (touch tone) or 500 (rotary/pulse dial) telephones]. A dedicated 
extension off a PBX unit without “Camp On” signals is also permissible 
with your LASER CLASS 2050P. Key telephone systems are not 
recommended because they send non-standard signals to individual 
telephones for ringing and special codes, which may cause a fax error.

C. Power Requirements

The power outlet should be a three-prong grounded receptacle 
(Single or Duplex). It should be independent from copiers, heaters, 
air conditioners or any electric equipment that is thermostatically 
controlled. The rated value is 120-127 volts and 15 amperes.

n

l-1100.book  Page ix  Friday, December 13, 2002  5:07 PM

Summary of Contents for LASER CLASS 2050P
















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands