Canon LASER CLASS 2050P User Manual Download Page 211

Page: 211 / 367

Using the Memory

Features

Chapter 8

Using the Memory Features

8-7

HT1-2205-000-V.1.0 LSL User’s Guide

Enter the destination(s) using any of the following three methods.

❏

One-Touch Speed Dialing:

Press the desired One-Touch Speed Dialing button(s).

❏

Coded Speed Dialing:

Press

Coded Dial

, then enter the two-digit code (00-99) using the

numeric buttons.

• Be sure to press

Coded Dial

before each code.

❏

Regular Dialing:

Enter the number using the numeric buttons and press Set, or
press Redial.

• You can only enter one number with the numeric buttons.

When you finish entering numbers, press

Set

to send the document.

Coded Dial

Redial

Set

l-1100.book Page 7 Friday, December 13, 2002 5:07 PM

Summary of Contents for LASER CLASS 2050P
















































































































































































































































































































































































Search results

Summary of Contents for LASER CLASS 2050P

Reviews:

Brands by name

Popular brands

Canon LASER CLASS 2050P, User Manual

Search results

Summary of Contents for LASER CLASS 2050P

Reviews:

Brands by name

Popular brands