manualshive.com logo in svg

Canon LASER CLASS 2050P, User Manual

Share
Download
Canon LASER CLASS 2050P User Manual Download Page 50

2-16

Setting Up Your Machine

Chapter 2

HT1-2205-000-V.1.0 LSL User’s Guide

Adjusting the Ringer and Speaker Volume Switches

The ringer volume switch allows you to select the ring volume of the 
handset for incoming calls, and the speaker volume allows you to select 
the speaker volume of the handset. Use a pen or other pointed object to 
adjust these switches to high or low.

Maintaining Your  Handset

Follow these guidelines to maintain your handset in top working 
condition.

❏

Do not leave your handset exposed to direct sunlight.

❏

Do not install your handset in hot or humid conditions.

❏

Do not spray aerosol polishes on your handset as they may enter the 
holes on your handset and cause damage.

❏

Use a damp cloth to clean your handset.

RINGER VOLUME SWITCH

SPEAKER VOLUME SWITCH

l-1100.book  Page 16  Friday, December 13, 2002  5:07 PM

Summary of Contents for LASER CLASS 2050P
















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands