Canon LASER CLASS 2050P User Manual Download Page 150

Page: 150 / 367

6-4

Sending Faxes

Chapter 6

HT1-2205-000-V.1.0 LSL User’s Guide

Problem documents

❏

To prevent paper jams in the Automatic Document Feeder (ADF), do
not use any of the following paper in machine:

❏

Remove all staples, paper clips, or any other fasteners before loading
the document into the Automatic Document Feeder (ADF).

❏

Make sure any glue, ink, or correction fluid on the paper is
completely dry before loading the document into the Automatic
Document Feeder (ADF).

❏

If you have a document that will not feed into machine properly,
make a photocopy of the document, then load the copy instead.

WRINKLED OR
CREASED PAPER

CURLED OR
ROLLED PAPER

TORN PAPER

CARBON PAPER OR
CARBON-BACKED
PAPER

COATED PAPER

ONION SKIN OR
THIN PAPER

l-1100.book Page 4 Friday, December 13, 2002 5:07 PM

Summary of Contents for LASER CLASS 2050P
















































































































































































































































































































































































Search results

Summary of Contents for LASER CLASS 2050P

Reviews:

Brands by name

Popular brands

Canon LASER CLASS 2050P, User Manual

Search results

Summary of Contents for LASER CLASS 2050P

Reviews:

Brands by name

Popular brands