7-6
Receiving Faxes
Chapter 7
HT1-2205-000-V.1.0 LSL User’s Guide
❏
F/T RING TIME
When your machine is set to receive both fax and telephone calls
automatically, it rings to alert you to pick up the handset if the call is
from a person. If you do not pick up the handset within a certain
amount of time, the machine stops ringing. Use this option to change
the number of times the machine rings, from 10 to 45 seconds. The
default is 15 seconds.
❏
DEFAULT ACTION
Not all fax machines are capable of sending a fax tone (the CNG tone
that warns the receiving machine that a fax is coming). For those
cases the machine may think that the call coming in is a voice call and
rings to alert you of the call (the amount of time it rings is determined
by the F/T RING TIME setting above). If you do not answer the call,
one of two things can happen:
1.
If you set the DEFAULT ACTION to RECEIVE, the machine
switches to fax receive mode automatically at that point and
starts to receive the document. If no document comes in, it
disconnects the call after approximately 45 seconds. The factory
default setting is RECEIVE.
2. If you set the DEFAULT ACTION to DISCONNECT, the machine
disconnects the telephone call immediately, freeing up your
phone line at this point.
l-1100.book Page 6 Friday, December 13, 2002 5:07 PM
