manualshive.com logo in svg

Canon LASER CLASS 2050P, User Manual

Share
Download
Canon LASER CLASS 2050P User Manual Download Page 77

Setting Up Your 

Machine

Chapter 2

Setting Up Your Machine

2-43

HT1-2205-000-V.1.0 LSL User’s Guide

4.

Gently insert the paper cassette into the machine until it clicks into 
position.

❏

If the paper cassette is not installed correctly, the received 
document image might shift, or the recording paper might jam.

❏

If you have difficulty inserting the paper cassette after removing it 
completely, disconnect the power cord, wait five seconds, and then 
reconnect it. When the PLEASE WAIT message is no longer 
displayed, try inserting the paper cassette again.

❏

If you pull out the paper cassette with paper remaining in the 
cassette, be sure to check the following before reinserting it.

– Make sure no paper is out of the cassette.

– Make sure there is no loose paper inside the machine.

❏

If the paper cassette sticks when you try inserting it in the machine, 
remove it from the machine and open the front cover. Then close it 
and try reinserting the paper cassette.

N

l-1100.book  Page 43  Friday, December 13, 2002  5:07 PM

Summary of Contents for LASER CLASS 2050P
















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands