manualshive.com logo in svg

Canon LASER CLASS 2050P, User Manual

Share
Download
Canon LASER CLASS 2050P User Manual Download Page 173

Sending Faxes

Chapter 6

Sending Faxes

6-27

HT1-2205-000-V.1.0 LSL User’s Guide

When it begins redialing, it alternately displays CALLING, the 
transaction number (TX/RX NO.), and the fax number you dialed.

❏

If you used One-Touch or Coded Speed Dialing to dial the number, 
the name registered under that button or code will also be displayed.

If the receiving machine does not answer on the last attempt, machine 
displays BUSY/NO SIGNAL.

If this happens, try sending again later.

Canceling Automatic Redialing

1.

Wait until machine begins redialing.

❏

While machine is waiting to redial, the LCD displays AUTO 
REDIAL.

2.

Press 

Stop

.

❏

The machine asks you to confirm that you want to cancel:

1 2 / 3 1 / 2 0 0 2 T U E 1 0 : 0 0

D I A L I N G

1 2 / 3 1 / 2 0 0 2 T U E 1 0 : 0 0

C A L L I N G

1 2 / 3 1 / 2 0 0 2 T U E 1 0 : 0 0
T X / R X N O .

0 0 1 7

1 2 / 3 1 / 2 0 0 2 T U E 1 0 : 0 0

A D A M B O O K S .

C P A

1 2 / 3 1 / 2 0 0 2 T U E 1 0 : 0 0

8 3 3 4 4 2 4

1 2 / 3 1 / 2 0 0 2 T U E 1 0 : 0 0

8 3 3 4 4 2 4

1 2 / 3 1 / 2 0 0 2 T U E 1 0 : 0 0

B U S Y / N O S I G N A L

1 2 / 3 1 / 2 0 0 2 T U E 1 0 : 0 0

D I A L I N G

C A N C E L   D U R I N G   T X / R X ?
Y E S = (

✱

)

N O = ( # )

Stop

l-1100.book  Page 27  Friday, December 13, 2002  5:07 PM

Summary of Contents for LASER CLASS 2050P
















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands