manualshive.com logo in svg

Canon LASER CLASS 2050P, User Manual

Share
Download
Canon LASER CLASS 2050P User Manual Download Page 156

6-10

Sending Faxes

Chapter 6

HT1-2205-000-V.1.0 LSL User’s Guide

2.

Gently insert the stack into the Automatic Document Feeder (ADF) 
until it stops.

❏

If you have further trouble with page jams while feeding, see “Jams 
in the Automatic Document Feeder (ADF)?,” on page 13-5.

❏

You cannot feed a multipage document of thick media, such as 
postcards or business cards. Use manual feed instead to feed one 
page at a time.

❏

Wait until all pages of your document have been scanned completely 
before starting a new job.

N

l-1100.book  Page 10  Friday, December 13, 2002  5:07 PM

Summary of Contents for LASER CLASS 2050P
















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands