manualshive.com logo in svg

Canon LASER CLASS 2050P, User Manual

Share
Download
Canon LASER CLASS 2050P User Manual Download Page 246

12-6

Reports and Lists

Chapter 12

HT1-2205-000-V.1.0 LSL User’s Guide

PGS. SENT

When OK appears under RESULT (see below), PGS.SENT 
represents the number of pages that were successfully 
transmitted when an error did not occur in the first 
attempt or in consequent retries. 
When NG appears under RESULT (see below), PGS.SENT 
indicates the pages after this page were not sent.

RESULT

OK means that all pages were transmitted either during 

the first attempt or after the first or second retry.

NG means that either some or no pages were transmitted 

after two retries.

Multi TX/RX  Report

If you used sequential broadcasting to send a document, the Multi TX/
RX Report is printed.

❏

If you set your machine to print activity reports (TX Report or RX 
Report) and then use sequential broadcastings or polling reception 
with multiple parties, multi-activity report will be printed instead of 
the activity report (Sending or Receiving). See TX REPORT and RX 
REPORT in REPORT SETTINGS, on pages 15-5 and 15-6.

 

TX/RX  NO 

0013 

  PGS. 

 

1  

 

  TX/RX  INCOMPLETE 

_____ 

  TRANSACTION   OK 

[ 

    

01]732 2233 

JOHN BARRISTER

   

[ 

    

03]1 914 438 3619 

SEYMOUR  GREEN

  ERROR INFORMATION 

_____

MULTI  TX/RX  REPORT

1 2 / 3 1 / 2 0 0 2   0 9 : 5 8   FA X   8 3 3 4 4 2 3   WORLD ESTATE,INC. 

001

❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉
❉ ❉ ❉

❉ ❉ ❉

❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉

l-1100.book  Page 6  Friday, December 13, 2002  5:07 PM

Summary of Contents for LASER CLASS 2050P
















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands