manualshive.com logo in svg

Canon LASER CLASS 2050P, User Manual

Share
Download
Canon LASER CLASS 2050P User Manual Download Page 280

13-24

Frequently Asked Questions

Chapter 13

HT1-2205-000-V.1.0 LSL User’s Guide

Faxing Problems 

Use the following tables to solve problems that can occur when sending 
and receiving faxes with the machine.

Sending Faxes

Problem

Possible cause

Solution

Cannot send a fax?

The machine may have 
overheated and shut itself 
down.

If you suspect this, 
disconnect the power cord 
and let it cool for several 
minutes. Then reconnect it 
and try sending again.

The machine may not be set 
for the type of telephone line 
you have (pulse/tone).

Make sure the machine is set 
for the type of telephone line 
you have. See page 3-12. (If 
you are not sure what type 
of line you have, contact 
your local telephone 
company.)

The document may not have 
been set correctly in the 
Automatic Document Feeder 
(ADF).

Remove the document, 
stack it, and feed it into the 
Automatic Document 
Feeder (ADF) again.

The one-touch or coded 
speed dialing number you 
used may not be registered.

Check the content of the 
One-Touch or Coded Speed 
Dialing button and make 
sure it was registered 
correctly. See Chapter 5.

The receiving machine may 
be out of paper.

Call the other party and 
make sure they have paper 
in their fax machine.

l-1100.book  Page 24  Friday, December 13, 2002  5:07 PM

Summary of Contents for LASER CLASS 2050P
















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands