manualshive.com logo in svg

Canon LASER CLASS 2050P, User Manual

Share
Download
Canon LASER CLASS 2050P User Manual Download Page 285

Frequently Asked 

Questions

Chapter 13

Frequently Asked Questions

13-29

HT1-2205-000-V.1.0 LSL User’s Guide

See also “Printing Problems,” on page 13-33.

The machine cannot 
receive faxes using 
ECM?

The sending machine may 
not support ECM.

If the sending fax does not 
support ECM, then the 
machine receives the fax in 
normal mode without error 
checking.

ECM reception may not be 
turned on.

Make sure the machine 
ECM RX setting is enabled. 
See pages 15-9 and 15-10.

Nothing prints?

The toner cartridge may not 
have been installed properly.

Make sure the toner 
cartridge is installed 
correctly. 
See page 2-33.

The toner cartridge may need 
to be replaced.

See page 2-33.

Received faxes are 
blotched or uneven?

The telephone lines may be 
in poor condition, or you 
may have a bad connection.

Use ECM receiving to try to 
eliminate such problems. 
However, if the telephone 
lines are in poor condition, 
you may need to have the 
fax sent again.

The sending machine may 
not be functioning properly.

The sending machine 
usually determines the fax’s 
quality. Call the sender and 
have them make sure the 
top cover and scanning 
glass on their machine are 
clean.

Problem

Possible cause

Solution

N

l-1100.book  Page 29  Friday, December 13, 2002  5:07 PM

Summary of Contents for LASER CLASS 2050P
















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands