manualshive.com logo in svg

Canon LASER CLASS 2050P, User Manual

Share
Download
Canon LASER CLASS 2050P User Manual Download Page 4

iv

Preface

HT1-2205-000-V.1.0 LSL User’s Guide

LEGAL LIMITATION ON USAGE OF YOUR PRODUCT AND 
THE USE OF IMAGES

Using your product to scan, print or otherwise reproduce certain 
documents, and the use of such images as scanned, printed or otherwise 
reproduced by your product, may be prohibited by law and may result in 
criminal and/or civil liability. A non-exhaustive list of these documents is 
set forth below. This list is intended to be a guide only. If you are 
uncertain about the legality of using your product to scan, print or 
otherwise reproduce any particular document, and/or of the use of the 
images scanned, printed or otherwise reproduced, you should consult in 
advance with your legal advisor for guidance.

• Paper money
• Money orders
• Certificates of deposit
• Postage stamps (canceled or uncanceled)
• Identifying badges or insignias
• Selective service or draft papers
• Checks or drafts issued by governmental agencies
• Motor vehicle licenses and certificates of title
• Traveler’s checks
• Food stamps
• Passports
• Immigration papers
• Internal revenue stamps (canceled or uncanceled)
• Bonds or other certificates of indebtedness
• Stock certificates
• Copyrighted works/works of art without permission of copyright 

owner

l-1100.book  Page iv  Friday, December 13, 2002  5:07 PM

Summary of Contents for LASER CLASS 2050P
















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands