manualshive.com logo in svg

Canon LASER CLASS 2050P, User Manual

Share
Download
Canon LASER CLASS 2050P User Manual Download Page 296

13-40

Frequently Asked Questions

Chapter 13

HT1-2205-000-V.1.0 LSL User’s Guide

CHECK POLLING ID

#021

No subaddress 
and/or password 
has been entered on 
your machine, or 
the subaddress 
and/or password 
do not match the 
settings on the other 
party’s machine.

Make sure the 
subaddress and/or 
password match the 
settings on the 
other party’s 
machine. See pages 
5-5 and 5-14.

#008

No subaddress 
and/or password 
has been entered on 
the other party’s 
machine, or the 
subaddress and/or 
password do not 
match the settings 
on your machine.

Contact the other 
party to enter the 
correct subaddress 
and/or password.

CHECK PRINTER

—

The toner cartridge 
in the machine is 
defective.

Reinstall the 
cartridge. 
See page 2-33. If the 
message remains in 
the LCD, replace the 
toner cartridge. See 
page 2-33.

The machine is 
connected to an 
uninterruptible 
power supply 
(UPS).

Make sure the 
power cord is 
connected to an AC 
outlet.

Message

Error Code

Cause

Action

l-1100.book  Page 40  Friday, December 13, 2002  5:07 PM

Summary of Contents for LASER CLASS 2050P
















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands