manualshive.com logo in svg

Canon LASER CLASS 2050P, User Manual

Share
Download
Canon LASER CLASS 2050P User Manual Download Page 177

Sending Faxes

Chapter 6

Sending Faxes

6-31

HT1-2205-000-V.1.0 LSL User’s Guide

Sequential Broadcasting 

Sending a Document to More Than One Destination

The machine’s sequential broadcasting feature allows you to send a fax to 
a sequence of up to 125 fax numbers, using any combination of dialing 
methods as follows:

❏

One-Touch Speed Dialing: up to 24 destinations

❏

Coded Speed Dialing:

up to 100 destinations

❏

Regular Dialing:

1 destination only

(with the numeric buttons or 

Redial

)

You can enter the One-Touch Speed Dialing and Coded Speed Dialing 
destinations in any order. You can also include one destination that you 
dial manually using the numeric buttons or by pressing 

Redial

.

To send a fax to more than one location, do the following:

Be sure to adjust the document feed lever before loading your 
document. See page 6-6 for details.

1.

Prepare the document and load it, face down, into the Automatic 
Document Feeder (ADF).

❏

If necessary, you can adjust the resolution and contrast. See page 
6-13 for details.

2.

Enter up to 125 fax destinations using any of the following three 
methods:

❏

One-Touch Speed Dialing:

Press the desired One-Touch Speed Dialing button(s).

N

01

24

~

l-1100.book  Page 31  Friday, December 13, 2002  5:07 PM

Summary of Contents for LASER CLASS 2050P
















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands