manualshive.com logo in svg

Canon LASER CLASS 2050P, User Manual

Share
Download
Canon LASER CLASS 2050P User Manual Download Page 103

Paper Handling

Chapter 4

Paper Handling

4-7

HT1-2205-000-V.1.0 LSL User’s Guide

When you are printing, follow these guidelines:

❏

Always set the paper delivery selector before starting to print.

❏

Do not switch the paper delivery selector until the printout comes out 
of the delivery slot completely. Otherwise, a paper jam may occur.

❏

Make sure there is enough room for the paper to exit from the face-up 
delivery slot.

❏

Never pull the paper as it comes out of the machine.

❏

When using face-up delivery, let the paper slide onto the extension 
tray.

❏

When using face-up delivery, remove each sheet as it is delivered 
through the face-up delivery slot.

❏

When using the multi-purpose tray, be careful not to let any foreign 
object, such as your necktie, necklace, hair, etc. enter into the feeder.

l-1100.book  Page 7  Friday, December 13, 2002  5:07 PM

Summary of Contents for LASER CLASS 2050P
















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands