manualshive.com logo in svg

Canon LASER CLASS 2050P, User Manual

Share
Download
Canon LASER CLASS 2050P User Manual Download Page 261

Frequently Asked 

Questions

Chapter 13

Frequently Asked Questions

13-5

HT1-2205-000-V.1.0 LSL User’s Guide

Paper Jams 

On occasion, the document feeding into the machine Automatic 
Document Feeder (ADF) or the paper in the paper cassette/the multi-
purpose tray may misfeed or jam. If this happens, you can usually fix the 
problem using one of the following procedures.

You do not need to disconnect the power cord while clearing paper jams.

Jams in the Automatic Document Feeder (ADF)?

Use this procedure if the document in the machine’s Automatic 
Document Feeder (ADF) jams or misfeeds. (If this occurs, the message 
CHECK DOCUMENT appears in the display.)

1.

Press 

Stop

.

❏

Do not try to pull the document out without opening the operation 
panel, or you may tear or smudge the document.

❏

If you have a multi-page document, remove the entire document 
from the Automatic Document Feeder (ADF), and reload it.

2.

Open the operation panel by gently pulling it toward you.

N

Stop

N

l-1100.book  Page 5  Friday, December 13, 2002  5:07 PM

Summary of Contents for LASER CLASS 2050P
















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands