Preface
v
HT1-2205-000-V.1.0 LSL User’s Guide
USERS IN THE U.S.A.
PRE-INSTALLATION REQUIREMENTS FOR CANON
FACSIMILE EQUIPMENT
A. Location
Supply a suitable table, cabinet, or desk. See the Appendix for the
machine’s dimensions and weight.
B. Order Information
1.
Only a single line, touch-tone or rotary telephone set is to be
used.
2.
Order an RJ11-C modular jack (USOC code), which should be
installed by the telephone company. If the RJ11-C jack is not
present, installation cannot occur.
3.
Order a normal business line from your telephone company’s
business representative. The line should be a regular voice grade
line or the equivalent. Use one line per machine.
DDD (DIRECT DISTANCE DIAL) LINE
-or-
IDDD (INTERNATIONAL DIRECT DISTANCE DIAL) LINE IF
YOU COMMUNICATE OVERSEAS
Canon recommends an individual line following industry standards, e.g.,
the 2500 (Touch Tone) or 500 (Rotary/Pulse Dial) telephones. A dedicated
extension off a PBX unit without “Call Waiting” can be used with the
LASER CLASS 2050P. Key telephone systems are not recommended
because they send non-standard signals to individual telephones for
ringing and special codes, which may cause a fax error.
C. Power Requirements
This equipment should be connected to a standard 120-127 V AC,
three-prong grounded outlet only. Do not connect this machine to an
outlet or power line shared with other appliances that cause
“electrical noise.” Air conditioners, electric typewriters, copiers, and
machines of this sort generate electrical noise which often interferes
with communications equipment and the sending and receiving of
documents.
N
l-1100.book Page v Friday, December 13, 2002 5:07 PM
