manualshive.com logo in svg

Canon LASER CLASS 2050P, User Manual

Share
Download
Canon LASER CLASS 2050P User Manual Download Page 297

Frequently Asked 

Questions

Chapter 13

Frequently Asked Questions

13-41

HT1-2205-000-V.1.0 LSL User’s Guide

CHECK PRINTER
(continued)

—

In either case, if the 
error does not clear, 
try disconnecting 
the power cord. Wait 
five seconds, then 
reconnect it. If the 
message remains in 
the LCD, contact 
your local 
authorized Canon 
Facsimile Dealer.

CHK SUBADDR/
PSWD

#083/102

You attempted to 
send a document or 
poll another 
machine with the 
incorrect 
subaddress and/or 
password.

Contact the other 
party to check their 
settings.
Change your 
settings if necessary. 

CLEAR PAPER JAM

—

Face-down delivery 
slot is full.

Take out sheets from 
delivery slot and 
clear the paper jam. 
See page 13-5.

There is a paper 
jam.

Clear the paper jam, 
then reload paper in 
the multi-purpose 
tray. See page 13-7.

DOC. TOO LONG

#003

The document is 
longer than 39.4” 
(1 meter).

Use a copier to 
divide the document 
into smaller sections 
and send the copy.

Message

Error Code

Cause

Action

l-1100.book  Page 41  Friday, December 13, 2002  5:07 PM

Summary of Contents for LASER CLASS 2050P
















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands