manualshive.com logo in svg

Canon LASER CLASS 2050P, User Manual

Share
Download
Canon LASER CLASS 2050P User Manual Download Page 263

Frequently Asked 

Questions

Chapter 13

Frequently Asked Questions

13-7

HT1-2205-000-V.1.0 LSL User’s Guide

Jams in the Output Slots?

Use this procedure if the recording paper jams or misfeeds in the output 
slots. If this happens, the message CLEAR PAPER JAM appears in the 
LCD display.

1.

Gently pull any jammed paper out of the machine as shown below.

2.

If you are using the multi-purpose tray, remove the paper stack 
from the multi-purpose tray and reload it, following the 
instructions in “Loading Recording Paper,” on page 2-39.

If the paper jam occurred while a fax was being received into the machine 
memory, that fax will print automatically when the jam is cleared.

N

l-1100.book  Page 7  Friday, December 13, 2002  5:07 PM

Summary of Contents for LASER CLASS 2050P
















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands