manualshive.com logo in svg

Canon LASER CLASS 2050P, User Manual

Share
Download
Canon LASER CLASS 2050P User Manual Download Page 277

Frequently Asked 

Questions

Chapter 13

Frequently Asked Questions

13-21

HT1-2205-000-V.1.0 LSL User’s Guide

Problems Feeding Paper into the Machine

If you are having problems feeding paper into the machine, check the 
following table.

If you are using the multi-purpose tray, whenever you correct one of 
these problems, be sure to remove the paper from the multi-purpose tray 
and reload it. See page 2-44.

The following problems can also cause the paper to jam in the machine. 
See page 13-5 for instructions on clearing paper jams.

N

Problem

Possible cause

Solution

Paper does not feed 
through the multi-
purpose tray?

The multi-purpose tray may 
contain too many sheets.

Make sure the multi-
purpose tray is not filled 
past the limit. See Chapter 4.

Paper may not be inserted 
correctly in the multi- 
purpose tray.

Make sure paper is inserted 
all the way into the multi- 
purpose tray. See page 2-44.

Printing is skewed?

Paper may not be stacked 
correctly in the multi- 
purpose tray.

Make sure the stack of paper 
is straight in the multi-
purpose tray.

Make sure there are no gaps 
between the stack of paper 
and the paper guides. 
See page 2-45.

Make sure the paper exit 
path is clear.

Several sheets feed 
through the multi-
purpose tray at once?

Paper may not be loaded in 
the multi-purpose tray 
correctly.

Make sure paper is inserted 
correctly in the multi-
purpose tray. See page 2-44.

Sheets of paper may be 
sticking together.

Fan the stack of paper and 
reload it.

l-1100.book  Page 21  Friday, December 13, 2002  5:07 PM

Summary of Contents for LASER CLASS 2050P
















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands