manualshive.com logo in svg

Canon LASER CLASS 2050P, User Manual

Share
Download
Canon LASER CLASS 2050P User Manual Download Page 217

Setting Up and 

Using Polling

Chapter 9

Setting Up and Using Polling

9-3

HT1-2205-000-V.1.0 LSL User’s Guide

Polling to Receive Faxes

The machine polling feature allows you to request a document to be 
faxed to you from another machine. The sender only needs to make sure 
the document is on his machine and ready to be sent: when your machine 
polls that machine, the document is sent automatically. The machine can 
poll any machine that supports polling.

Requesting Another Machine to Send a Document

1.

Open the One-Touch Speed Dialing panel.

2.

Press 

Polling

.

3.

Use 

 or 

 to select 2.POLLING RX.

4.

Press 

Set

.

P O L L I N G

1 . P O L L I N G T X

Polling

P O L L I NG   

 

  2 . P O L L I N G R X

T E L =

Set

l-1100.book  Page 3  Friday, December 13, 2002  5:07 PM

Summary of Contents for LASER CLASS 2050P
















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands