manualshive.com logo in svg

Canon LASER CLASS 2050P, User Manual

Share
Download
Canon LASER CLASS 2050P User Manual Download Page 80

2-46

Setting Up Your Machine

Chapter 2

HT1-2205-000-V.1.0 LSL User’s Guide

Testing the Machine

After you have assembled your machine, installed the toner cartridge, 
and loaded plain paper in the paper cassette or the multi-purpose tray, 
you can make sure the machine is printing properly by making several 
copies of a document. For instructions, see Chapter 11, “Making Copies.”

Note the following:

❏

If the printed sheets are curled as they exit the machine, remove them 
from the output slot immediately to avoid paper jams.

❏

Make sure your text or graphics fall within the printable area.

l-1100.book  Page 46  Friday, December 13, 2002  5:07 PM

Summary of Contents for LASER CLASS 2050P
















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands