manualshive.com logo in svg

Canon LASER CLASS 2050P, User Manual

Share
Download
Canon LASER CLASS 2050P User Manual Download Page 304

14-2

Maintaining Your Machine

Chapter 14

HT1-2205-000-V.1.0 LSL User’s Guide

Cleaning the Machine

Clean your machine regularly to keep it in good operating condition.

Follow these precautions whenever you clean the machine:

❏

When the power cord is disconnected, any documents stored in 
memory will be erased if you leave the machine disconnected for one 
hour or more. Be sure to connect the power cord after cleaning to 
avoid this happening. If REC’D IN MEMORY appears in the LCD 
display, follow the steps on pages 8-2 through 8-5 to print out the 
document.

❏

If you disconnect the machine while it is waiting to send a document, 
you will have to set the machine to send your document again once 
you finish cleaning it. However, when you have set a document for 
delayed transmission, the machine holds the document in its memory 
for about an hour.

❏

Do not use tissue paper, paper towels, or similar materials for 
cleaning; they can stick to the components or generate static charges.

Cleaning the Machine’s Exterior 

Clean the machine’s outer casing as follows.

1.

Disconnect the power cord from the machine.

2.

Wipe the machine’s exterior with a clean, soft, lint-free cloth 
moistened with water or diluted dishwashing detergent solution.

Never use thinner, benzene, alcohol, or any other organic solvent to clean 
the machine, as these can damage the machine’s surface.

3.

Reconnect the power cord.

N

C

l-1100.book  Page 2  Friday, December 13, 2002  5:07 PM

Summary of Contents for LASER CLASS 2050P
















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands