manualshive.com logo in svg

Canon LASER CLASS 2050P, User Manual

Share
Download
Canon LASER CLASS 2050P User Manual Download Page 289

Frequently Asked 

Questions

Chapter 13

Frequently Asked Questions

13-33

HT1-2205-000-V.1.0 LSL User’s Guide

Printing Problems

If you are having problems printing with the machine, check the 
problems and solutions listed in the following table.
When printing problems occur while printing from your PC, refer to the 
Printer Driver Software User’s Guide.

Problem

Possible cause

Solution

The 

Alarm

 lamp comes 

on and the machine 
beeps while printing?

The machine may have a 
paper jam.

Clear any paper jams as 
described earlier in this 
chapter.

The machine may have no 
paper jam.

Disconnect the power cord, 
wait five seconds, then 
reconnect it. If the problem 
is fixed, the 

Alarm

 lamp 

will be off, and the LCD 
display will show the date 
and receiving mode 
(standby mode). If the 

Alarm

 lamp stays on, call 

your local authorized 
Canon Facsimile Dealer.

Nothing prints?

The power cord may not be 
connected securely.

Make sure the power cord 
is connected securely to the 
machine and to a wall 
outlet.

The toner cartridge may need 
to be replaced.

Replace the toner 
cartridge. See page 2-33.

l-1100.book  Page 33  Friday, December 13, 2002  5:07 PM

Summary of Contents for LASER CLASS 2050P
















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands