manualshive.com logo in svg

Canon LASER CLASS 2050P, User Manual

Share
Download
Canon LASER CLASS 2050P User Manual Download Page 345

Glossary

G

-

3

HT1-2205-000-V.1.0 LSL User’s Guide

Glossary

D

Delayed sending 

The ability to send a document at a preset time in the future. You do not 
have to be in your office to use delayed sending to one or more 
destinations. (You can set up only one delayed transmission at a time on 
the machine.)

Dialing methods 

Ways of pressing one or more buttons to access a number to connect to an 
outside party or fax machine. Dialing methods include One-Touch, 
Coded Speed Dialing, Group Dialing, and regular Dialing with the 
numeric buttons.

Document 

The sheet of paper containing the data that you send to, or receive from a 
machine.

dpi

Dots per inch.

 A unit of measurement for indicating a machine’s 

resolution. Your machine produces a resolution of 600 dpi.

Dual access (Multitasking)

Enables the machine to receive a fax, even if it is copying or printing a 
document. Also enables you to scan other documents into memory, make 
copies, print out reports, print documents or register information while 
the machine sends a document from memory.

E

ECM

Error Correction Mode.

 The ability of your machine to reduce system and 

line errors when sending or receiving from another machine with ECM 
capability. ECM is most effective in areas where the telephone lines are in 
poor condition or there is frequent interference on the line. Do not use 
ECM if you need to send a document quickly and you are sure the other 
party can read your transmission without it (turning off ECM also turns 
off MMR).

Extension

A telephone connected to the machine that is used in place of the handset. 
You can use the extension telephone to activate incoming reception of 
documents manually.

l-1100.book  Page 3  Friday, December 13, 2002  5:07 PM

Summary of Contents for LASER CLASS 2050P
















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands