manualshive.com logo in svg

Canon LASER CLASS 2050P, User Manual

Share
Download
Canon LASER CLASS 2050P User Manual Download Page 46

2-12

Setting Up Your Machine

Chapter 2

HT1-2205-000-V.1.0 LSL User’s Guide

Attaching the Support Trays

There are two identical support trays. One of the support trays holds 
paper as it comes out of the face-down delivery slot. To install this 
support, insert the tabs into the corresponding slots above the face-down 
delivery slot, making sure that the smaller tab is on the left.

The other support tray holds documents as they are fed into the 
Automatic Document Feeder (ADF). To install this support, insert the 
tabs into the corresponding slots above the Automatic Document Feeder 
(ADF), making sure that the smaller tab is on the left.

l-1100.book  Page 12  Friday, December 13, 2002  5:07 PM

Summary of Contents for LASER CLASS 2050P
















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands