manualshive.com logo in svg

Canon iPF8400SE imagePROGRAF, User Manual

The Canon iPF8400SE imagePROGRAF is a high-performance large format printer designed for professionals. To ensure hassle-free operation, a comprehensive and user-friendly User Manual is available for download, free of charge, from our manualshive.com. This manual provides step-by-step instructions and helpful tips to optimize your printing experience.

Share
Download
background image

Interface

Hi-Speed USB

Format

Internal port

Mode

Full-speed (12 Mbps), high-speed (480 Mbps), bulk transfer

Connector

Series B (4-pin)

Ethernet

Format

Internal port

Specification

IEEE 802.3 10Base-T,
IEEE 802.3u 100Base-TX/Auto-Negotiation,
IEEE 802.3x Full Duplex

Protocols

IPX/SPX (Netware 4.2, 5.1, 6.0), SNMP (Canon-MIB compati-
ble), HTTP, TCP/IP (IPv4/IPv6), AppleTalk

Ink

For information on the ink the printer supports, 

see "Ink Tanks."

➔

P.534

Paper

For information on the types of paper the printer supports, refer to the 

Paper Reference Guide

. 

 (See "Displaying

the Paper Reference Guide.")

➔

P.330

Paper width

For information on the paper widths the printer supports, see "Paper Sizes."

➔

P.326

Minimum paper length

203.2 mm (8.0 in)

Maximum printable length (*1)

Rolls

18 m (19.7 yd)

Sheets

1,600 mm (63.0 in)

Thickness

Rolls

0.07–0.8 mm (0.0028–0.031 in)

Sheets

0.07–0.8 mm (0.0028–0.031 in)

Roll maximum outer diameter

150 mm (6 in) or shorter

Supported paper core inner diameter

2 inches / 3 inches

Print area

For details, see "Print Area."

➔

P.631

*1: Varies depending on the operating system or application.

Print Area

Print Area

A margin required by the printer is added with respect to the size of paper loaded in the printer. Except in border-
less printing, the actual printing area corresponds to the paper size minus the space for this margin.

Note

•

Printable Area: The area that can be printed.

•

There is no margin (that is, a margin of 0 mm) during borderless printing on rolls.

•

Recommended Print Area: We recommend printing within this area.

•

To print so that your original matches the print area exactly, use an oversized paper size that includes the required
margin. 

 (See "Printing on Oversize Paper.")

➔

P.61

 

Margins of Printable Area

Margins of Recommended Print Area

Top Edge

Bottom Edge

Sides

Top Edge

Bottom Edge

Sides

Sheets 5 mm (0.20 in)

23 mm (0.91 in)

5 mm (0.20 in)

20 mm (0.79 in) 23 mm (0.91 in) 5 mm (0.20 in)

Rolls

0/5 mm (0/0.20 in) 0/5 mm (0/0.20 in) 0/5 mm (0/0.20 in) 20 mm (0.79 in) 5 mm (0.20 in)

5 mm (0.20 in)

iPF8400SE

                                                                                                                                                                                                   

Print Area

User's Guide

                                                                                                                                                                                                                     

 

 

Specifications

Printer Specifications

631

 

Summary of Contents for iPF8400SE imagePROGRAF











































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for iPF8400SE imagePROGRAF

GCC Technologies J5-160-P User Manual preview
J5-160-P
Brand: GCC Technologies Pages: 66
Roland VersaUv LEF - 12i Master Manual preview
VersaUv LEF - 12i
Brand: Roland Pages: 100
Roland SOLJET PRO4 XF-640 User Manual preview
SOLJET PRO4 XF-640
Brand: Roland Pages: 196

Brands by name

Popular brands

Load more brands