manualshive.com logo in svg

Canon iPF8400SE imagePROGRAF, User Manual

The Canon iPF8400SE imagePROGRAF is a high-performance large format printer designed for professionals. To ensure hassle-free operation, a comprehensive and user-friendly User Manual is available for download, free of charge, from our manualshive.com. This manual provides step-by-step instructions and helpful tips to optimize your printing experience.

Share
Download
background image

Important

•

This function is not available with Tracing Paper, Translucent Matte Film, or Clear Film.

•

If adjustment is not possible as expected using special media, try another type of paper, or try 

Manual

 adjust-

ment.

 (See "Manual Adjustment to Straighten Lines and Colors.")

➔

P.522

Note

•

Because the results of adjustment vary depending on the type of paper used for adjustment, use the same type of
paper as you will use for printing.

•

If 

Standard

 does not improve printing, try adjusting the printhead manually.

 (See "Manual Adjustment to Straighten Lines and Colors.")

➔

P.522

•

If the printhead position was not adjusted during initial setup or when the printhead was replaced, execute 

Initial

adjustmt

.

 (See "Adjustment When Installing the Printhead.")

➔

P.523

Items to Prepare

When Using Rolls

An unused roll at least 254.0 mm (10.00 in) wide

When Using Sheets

Standard

 : Two sheets of unused paper, A4/Letter size (or one sheet when using A3 or larger)

Simple

: One sheet of unused paper, A4/Letter size

Perform adjustment as follows.

1

Load paper.

•

Loading Rolls on the Roll Holder

➔

P.337

•

Loading Rolls in the Printer

➔

P.339

•

Loading Sheets in the Printer

➔

P.360

Important

•

Always make sure the loaded paper matches the type of paper specified on the printer. Adjustment can-
not be completed correctly unless the loaded paper matches the settings.

2

 

On the 

Tab Selection screen

 of the Control Panel, press 

◀

 or 

▶

 to

select the Settings/Adj. tab (

).

Note

•

If the 

Tab Selection screen

 is not displayed, press the 

Menu

 button.

3

Press the 

OK

 button.

The 

Set./Adj. Menu

 is displayed.

4

Press 

▲

 or 

▼

 to select 

Adjust Printer

, and then press the 

OK

 button.

5

Press 

▲

 or 

▼

 to select 

Head Posi. Adj.

, and then press the 

OK

 button.

6

Press 

▲

 or 

▼

 to select 

Standard

 or 

Simple

, and then press the 

OK

 button.

A test pattern is printed for adjustment.
Adjustment is now finished if you have printed on a roll.

7

If you are printing on cut sheets, a confirmation message is displayed on the Display Screen asking you
whether to continue printing.
Press the 

OK

 button and follow the instructions on the Display Screen.

 

iPF8400SE

                                                                                                                              

Automatic Adjustment to Straighten Lines and Colors

User's Guide

                                                                                                                                                                                                                     

 

 

Adjustments for Better Print Quality

Adjusting the Printhead

521

 

Summary of Contents for iPF8400SE imagePROGRAF











































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for iPF8400SE imagePROGRAF

GCC Technologies EXPERT 24 LX Firmware Model Changing preview
EXPERT 24 LX
Brand: GCC Technologies Pages: 2

Brands by name

Popular brands

Load more brands