manualshive.com logo in svg

Canon iPF8400SE imagePROGRAF, User Manual

The Canon iPF8400SE imagePROGRAF is a high-performance large format printer designed for professionals. To ensure hassle-free operation, a comprehensive and user-friendly User Manual is available for download, free of charge, from our manualshive.com. This manual provides step-by-step instructions and helpful tips to optimize your printing experience.

Share
Download
background image

Important

•

Used maintenance cartridges are heavy. Always grasp the cartridge firmly and keep the cartridge level
during removal and storage. If you drop a used Maintenance Cartridge or store it at an angle, ink may
leak and cause stains.

•

The remaining Maintenance Cartridge capacity is recorded on each printer. Do not install a used Mainte-
nance Cartridge in another printer.

4

 

Attach the packaging material to the used Mainte-
nance Cartridge. Keep it level as you put it in the
plastic bag. Expel excess air from the plastic bag and
seal the zipper.

5

 

Confirm the Maintenance Cartridge is right-side up,
put it in the box, and store it so that it stays level.

Important

•

Always put the used Maintenance Cartridge back in the box and store the box on a flat surface. Also,
seal the zipper thoroughly. Otherwise, ink may leak and cause stains.

Note

•

Put the used Maintenance Cartridge in the plastic bag of the new cartridge, and dispose of it in accord-
ance with local regulations.

6

 

Wipe away any soiling on the Maintenance Cartridge
Cover.

Important

•

Support the Maintenance Cartridge Cover from underneath as you wipe it.

 

 

 

iPF8400SE

                                                                                                                                                       

Replacing the Maintenance Cartridge

User's Guide

                                                                                                                                                                                                                     

 

 

Maintenance and Consumables

Maintenance Cartridge

561

 

Summary of Contents for iPF8400SE imagePROGRAF











































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for iPF8400SE imagePROGRAF

CMi RoboPro CE5000-40-CRP: User Manual preview
RoboPro CE5000-40-CRP:
Brand: CMi Pages: 23
MIMAKI JV3 Series Operation Manual preview
JV3 Series
Brand: MIMAKI Pages: 10

Brands by name

Popular brands

Load more brands