manualshive.com logo in svg

Canon iPF8400SE imagePROGRAF, User Manual

The Canon iPF8400SE imagePROGRAF is a high-performance large format printer designed for professionals. To ensure hassle-free operation, a comprehensive and user-friendly User Manual is available for download, free of charge, from our manualshive.com. This manual provides step-by-step instructions and helpful tips to optimize your printing experience.

Share
Download
background image

6

Press 

▲

 or 

▼

 to select 

On

, and then press the 

OK

 button.

The display reverts to the 

NetWare

 menu.

7

Press 

▲

 or 

▼

 to select 

Frame Type

, and then press the 

OK

 button.

8

Press 

▲

 or 

▼

 to select the frame type to use, and then press the 

OK

 button.

The display reverts to the 

NetWare

 menu.

9

Press 

▲

 or 

▼

 to select 

Print Service

, and then press the 

OK

 button.

10

Press 

▲

 or 

▼

 to select the desired print service, and then press the 

OK

 button.

The display reverts to the 

NetWare

 menu.

11

 

Press the 

Menu

 button.

If you have changed any settings, a confirmation mes-
sage is displayed. In this case, press the 

OK

 button.

Important

•

Be sure to complete step 11. This will activate the values you have entered.

Note

•

If an error message is displayed, check the settings and correct any invalid values.

•

To cancel this process, press the 

Back

 button.

Specifying NetWare Print Services

Specifying NetWare Print Services

Before printing in a NetWare network, you must configure print services such as print servers, print queues, and so
on. You can configure the print service settings from a computer using any of the following Novell software provi-
ded with NetWare.

•

NWADMIN

•

PCONSOLE

Important

•

If you use NWADMIN to configure the print service settings, Novell Client (the Novell NetWare client software)
must be installed as the client software application.

•

NetWare networking is unsupported in Windows Vista, Windows Server 2008 and Windows 7.

This topic gives instructions for configuring NetWare print services. The order of this procedure may vary depend-
ing on the environment.

Choosing the type of print services

Before completing print service settings, choose the type of print service. Refer to the following descriptions as
needed.

Note

•

In NetWare 5.1 or 6.0, NDPS may also be used as the print service. If you use NDPS, use the Novell printer gate-
way included with NetWare. For details on configuring NDPS, refer to the NetWare documentation.

•

NDS (Novell Directory Service) and bindery
NDS and bindery are both supported. Use the mode that is compatible with your network environment.

•

Queue server mode and remote printer mode
Queue server mode and remote printer mode are both supported.

 

iPF8400SE

                                                                                                                                                             

Specifying NetWare Print Services

User's Guide

                                                                                                                                                                                                                     

 

 

Network Setting

NetWare Settings

487

 

Summary of Contents for iPF8400SE imagePROGRAF











































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for iPF8400SE imagePROGRAF

MIMAKI JV22-130 Operation Manual preview
JV22-130
Brand: MIMAKI Pages: 126
MIMAKI CF3-1610 Operation Manual preview
CF3-1610
Brand: MIMAKI Pages: 166
MIMAKI CFL-605RT Operation Manual preview
CFL-605RT
Brand: MIMAKI Pages: 170

Brands by name

Popular brands

Load more brands