Calrec Apollo, Operator'S Manual

Page: 51 / 214

CALREC
Putting Sound in the Picture
51
FIG 2 - SETUP STRIPS ON THE MODES ROW
Modes row in its typical state.
After touching the STRIPS button, the different Strip
control options are shown.
Touching the BACK TO MODES button re-
turns the Modes row back to its typical state.
PROCESSING
A/B path indicator
There is an indicator below each routing
strip on the TFT which shows the fader
number and path label. This changes
colour to indicate whether the A (green)
or B (yellow) path is selected on the fader.
The currently assigned path is coloured
blue.
Changing Strips types
When STRIPS mode is selected on the
Modes row, the available strips types are
shown here: Input & Pan, EQ, Dynamics,
Aux 1-24, Aux 25-48, Track Sends and
Direct Outputs. To select an arrangement
of strips, touch the desired strip to assign
it to the panel. Touch the BACK TO
MODES button to return to the typical
Modes row display. This process is
illustrated in Fig 2.